PPE for General Industry

Terms (60)

1. 01

   Under 29 CFR 1910.132, what must employers do to ensure PPE is appropriate?

   Employers must assess the workplace to determine if hazards are present that necessitate the use of PPE, and select and have each affected employee use PPE that will protect them from the hazards identified. (29 CFR 1910.132(d))

2. 02

   What types of hazards require the use of head protection per OSHA?

   Head protection is required where there is potential for injury from falling or flying objects, or from fixed objects like exposed pipes. (29 CFR 1910.135(a))

3. 03

   How must employers verify that a hazard assessment for PPE has been performed?

   Employers must certify in writing that a workplace hazard assessment has been performed, including the document certifying such an assessment. (29 CFR 1910.132(d)(2))

4. 04

   Under 29 CFR 1910.133, what standard must eye protection meet?

   Eye and face protection must comply with the American National Standards Institute, ANSI Z87.1-1989, or be equally effective. (29 CFR 1910.133(b))

5. 05

   What is required for foot protection in general industry?

   Foot protection must be worn where there are hazards such as heavy objects that could fall, or sharp objects that could pierce the soles. (29 CFR 1910.136(a))

6. 06

   When must hand protection be provided according to OSHA?

   Hand protection must be provided where employees' hands are exposed to hazards such as skin absorption of harmful substances, cuts, or burns. (29 CFR 1910.138(a))

7. 07

   Under 29 CFR 1910.132, who is responsible for providing PPE?

   Employers are responsible for providing and paying for PPE, except in specific cases like non-specialty safety-toe protective footwear and ordinary clothing. (29 CFR 1910.132(h))

8. 08

   What must be done with defective PPE in the workplace?

   Defective PPE must not be used and must be removed from service until repaired or replaced. (29 CFR 1910.132(e))

9. 09

   How should PPE be maintained per OSHA standards?

   PPE must be maintained in a sanitary and reliable condition, with cleaning, replacement, and proper storage as necessary. (29 CFR 1910.132(h))

10. 10

    What is the role of training in PPE use under OSHA?

    Employees must be trained on the use, limitations, and care of PPE, and demonstrate understanding of the training. (29 CFR 1910.132(f))

11. 11

    Under 29 CFR 1910.137, what applies to electrical protective equipment?

    Electrical protective equipment must be capable of withstanding the voltage and energy level involved and must be maintained in a safe, reliable condition. (29 CFR 1910.137(b))

12. 12

    What hazards require the use of face protection?

    Face protection is required for hazards such as flying objects, liquid chemicals, acids, or caustic liquids. (29 CFR 1910.133(a))

13. 13

    What does 29 CFR 1910.138 specify for hand protection?

    Appropriate hand protection must be provided for hazards like cuts, abrasions, punctures, chemical burns, or thermal burns. (29 CFR 1910.138(a))

14. 14

    How often must employees be retrained on PPE use?

    Retraining is required whenever there is a change in the workplace that renders previous training obsolete, or if an employee demonstrates inadequate knowledge. (29 CFR 1910.132(f)(3))

15. 15

    What is the minimum requirement for eye protection against impact?

    Eye protection must provide adequate protection against the specific hazards, such as impact from flying particles. (29 CFR 1910.133(a)(2))

16. 16

    Under OSHA, what must be done before using PPE for the first time?

    Employees must be trained on the proper use, inspection, and maintenance of the PPE before it is used. (29 CFR 1910.132(f))

17. 17

    In a scenario with chemical exposure, what PPE is typically required?

    Appropriate PPE such as gloves, aprons, and eye protection must be used to protect against chemical hazards. (29 CFR 1910.132 and 1910.1200)

18. 18

    What PPE is needed for welding operations?

    Eye, face, and body protection suitable for the specific hazards of welding, such as protection against radiation and flying particles. (29 CFR 1910.133 and 1910.252)

19. 19

    How must PPE be fitted to employees?

    PPE must be provided in sizes that properly fit each affected employee. (29 CFR 1910.132(d)(1)(iii))

20. 20

    What is required if an employee refuses to wear PPE?

    Employers must ensure compliance by providing training and enforcing the use of PPE as required. (29 CFR 1910.132(a))

21. 21

    A worker handling hot materials needs what protection?

    Foot and hand protection to guard against burns and impacts from hot materials. (29 CFR 1910.136 and 1910.138)

22. 22

    Under 29 CFR 1910.135, when is hard hat use mandatory?

    Hard hats must be worn where there is danger of head injury from impact, flying or falling objects, or electrical shock. (29 CFR 1910.135(a))

23. 23

    What must employers document regarding PPE training?

    Employers must verify that each affected employee has received and understood the required PPE training. (29 CFR 1910.132(f)(4))

24. 24

    In a scenario with slippery floors, what PPE might be required?

    Foot protection with slip-resistant soles to prevent slips and falls. (29 CFR 1910.136)

25. 25

    What is the first step in selecting PPE for a job?

    Conduct a hazard assessment to identify and evaluate workplace hazards. (29 CFR 1910.132(d))

26. 26

    How should PPE be stored to maintain its effectiveness?

    PPE must be stored in a clean and sanitary location to prevent damage and contamination. (29 CFR 1910.132(h))

27. 27

    A worker exposed to biohazards should use what PPE?

    Appropriate PPE such as gloves, gowns, and eye protection as specified for bloodborne pathogens. (29 CFR 1910.1030(d))

28. 28

    Under 29 CFR 1910.132, what exceptions exist for PPE payment?

    Employers do not have to pay for non-specialty safety-toe protective footwear and non-prescription eye protection. (29 CFR 1910.132(h))

29. 29

    What procedure follows a PPE hazard assessment?

    Select and verify that the PPE protects against the hazards identified in the assessment. (29 CFR 1910.132(d)(1))

30. 30

    In a noisy environment, what additional PPE is needed?

    Hearing protection in addition to other required PPE, as per noise exposure standards. (29 CFR 1910.95 and 1910.132)

31. 31

    What must be checked before using respiratory PPE?

    Respirators must be inspected for defects and fitted properly before use. (29 CFR 1910.134)

32. 32

    Under 29 CFR 1910.136, what standard applies to safety shoes?

    Safety shoes must meet the performance criteria of ASTM F-2412 or equivalent standards. (29 CFR 1910.136(b))

33. 33

    What is required if PPE becomes contaminated?

    Contaminated PPE must be cleaned or disposed of properly to prevent exposure. (29 CFR 1910.132(h) and 1910.1030)

34. 34

    A worker in electrical work needs what specific PPE?

    Insulated gloves and other electrical protective equipment rated for the voltage involved. (29 CFR 1910.137)

35. 35

    How must employees demonstrate PPE knowledge?

    By understanding the training provided and being able to use PPE properly in the workplace. (29 CFR 1910.132(f)(2))

36. 36

    What PPE is essential for handling acids?

    Chemical-resistant gloves, aprons, and eye/face protection to prevent skin and eye contact. (29 CFR 1910.133 and 1910.138)

37. 37

    Under 29 CFR 1910.132, what follows employee training?

    Retraining if necessary, and verification that the employee can use PPE effectively. (29 CFR 1910.132(f))

38. 38

    What is the key requirement for PPE design?

    PPE must be designed to protect against the specific hazards for which it is chosen. (29 CFR 1910.132(b))

39. 39

    In a scenario with flying debris, what PPE is mandatory?

    Eye and face protection to shield against flying particles. (29 CFR 1910.133(a))

40. 40

    What steps ensure PPE compatibility?

    Employers must ensure that when other PPE is worn, it does not create additional hazards or interfere with other equipment. (29 CFR 1910.132(d)(1)(iv))

41. 41

    How often should PPE be inspected for wear?

    PPE must be inspected regularly, including before each use, to ensure it is in safe condition. (29 CFR 1910.132(e))

42. 42

    Under 29 CFR 1910.138, what protects against chemical exposure?

    Gloves and other hand protection that are impervious to the specific chemicals being handled. (29 CFR 1910.138(a))

43. 43

    What PPE is used for protection against falls?

    Body harnesses and lanyards as part of fall protection systems, though primarily covered under other standards. (29 CFR 1910.132 and 1926.502)

44. 44

    A worker near moving machinery needs what protection?

    Hand and body protection to guard against entanglement and impact hazards. (29 CFR 1910.138 and 1910.132)

45. 45

    What must be done with used PPE in hazardous areas?

    Used PPE must be decontaminated or disposed of according to the specific hazard standards. (29 CFR 1910.132(h))

46. 46

    Under 29 CFR 1910.134, what is required for respirators?

    Respirators must be selected based on the respiratory hazard to which the worker is exposed. (29 CFR 1910.134(d))

47. 47

    What procedure involves fitting PPE to employees?

    PPE must be fitted and tested to ensure proper protection for each individual employee. (29 CFR 1910.132(d)(1))

48. 48

    In a chemical spill scenario, what PPE is first used?

    Full-body protection including chemical-resistant suits, gloves, and respirators as appropriate. (29 CFR 1910.120 and 1910.132)

49. 49

    What is the primary purpose of PPE in OSHA standards?

    To protect employees from workplace hazards that cannot be eliminated through engineering or administrative controls. (29 CFR 1910.132(a))

50. 50

    How must electrical PPE be tested?

    Electrical protective equipment must be inspected and tested as necessary to ensure it is safe for use. (29 CFR 1910.137(b))

51. 51

    Under 29 CFR 1910.133, what protects against laser beams?

    Special filtering lenses or eye protection designed for the specific type of laser radiation. (29 CFR 1910.133(a)(5))

52. 52

    What PPE is required for cryogenic material handling?

    Gloves, face shields, and protective clothing to prevent cold burns and exposure. (29 CFR 1910.138 and general PPE requirements)

53. 53

    What follows a PPE inspection if defects are found?

    The defective PPE must be removed from service and repaired or replaced. (29 CFR 1910.132(e))

54. 54

    In a scenario with overhead risks, what head PPE is needed?

    Hard hats to protect against falling objects. (29 CFR 1910.135(a))

55. 55

    Under 29 CFR 1910.132, what ensures PPE effectiveness?

    Regular maintenance and employee training on proper use. (29 CFR 1910.132(f) and (h))

56. 56

    What is required for PPE used in confined spaces?

    Appropriate PPE as determined by the hazards present, such as respiratory protection. (29 CFR 1910.146 and 1910.132)

57. 57

    How should PPE be cleaned after use?

    PPE must be cleaned and disinfected as necessary to maintain hygiene and effectiveness. (29 CFR 1910.132(h))

58. 58

    A worker exposed to radiation needs what protection?

    Appropriate shielding and protective clothing as per relevant standards. (29 CFR 1910.132 and other applicable regulations)

59. 59

    What must employers provide for PPE training sessions?

    Information on when PPE is necessary and what PPE is necessary. (29 CFR 1910.132(f)(1))

60. 60

    Under 29 CFR 1910.136, what footwear protects against electrical hazards?

    Insulated and electrically protective footwear for specific electrical risks. (29 CFR 1910.136 and 1910.137)