Aerial Lifts in General Industry

Terms (60)

1. 01

   What is an aerial lift under OSHA regulations?

   An aerial lift is any vehicle-mounted device, telescoping or articulating, or both, which is used to position personnel. (29 CFR 1910.67(a))

2. 02

   Under 29 CFR 1910.67, what must be done if an aerial lift is modified?

   Any modification to an aerial lift must be certified in writing by the manufacturer or by any other equivalent entity, such as a nationally recognized testing laboratory, to ensure it conforms to applicable ANSI standards. (29 CFR 1910.67(c))

3. 03

   What personal protective equipment is required when working from an aerial lift?

   Employees must use a body belt or harness and a lanyard attached to the boom or basket to prevent falls. (29 CFR 1910.67(e)(2))

4. 04

   How should operators be instructed on aerial lifts?

   Operators shall be instructed in the proper operation, hazards associated with use, and safe use practices as outlined in the manufacturer's operating manual. (29 CFR 1910.67(e)(4))

5. 05

   Under 29 CFR 1910.67, what is required for the design of aerial lifts?

   Aerial lifts shall be designed and constructed in accordance with the applicable requirements of ANSI A92.2-1969, including provisions for operator instructions and vehicle protection. (29 CFR 1910.67(b))

6. 06

   What must be ensured before an aerial lift is used?

   The aerial lift must be inspected to ensure it is in safe operating condition and free of visible defects. (29 CFR 1910.67(e)(1))

7. 07

   In what condition must aerial lifts be maintained?

   Aerial lifts shall be maintained in accordance with the manufacturer's recommendations to ensure safe operation. (29 CFR 1910.67(e)(1))

8. 08

   What is required if an aerial lift's controls are not functioning properly?

   The aerial lift must not be used until the controls are repaired and certified as safe by a qualified person. (29 CFR 1910.67(e)(3))

9. 09

   Under OSHA standards, who can approve modifications to an aerial lift?

   Modifications must be approved in writing by the manufacturer or an equivalent entity, such as a nationally recognized testing laboratory. (29 CFR 1910.67(c))

10. 10

    What hazards must operators be trained on for aerial lifts?

    Operators must be trained on electrical hazards, fall hazards, and instability risks associated with aerial lifts. (29 CFR 1910.67(e)(4))

11. 11

    How must aerial lifts be operated near power lines?

    Aerial lifts must be operated with caution near power lines, maintaining safe distances as specified in applicable standards to prevent electrical contact. (29 CFR 1910.67(e)(7))

12. 12

    What is the requirement for guarding on aerial lifts?

    Aerial lifts must have guards or devices to prevent accidental lowering of the boom or basket. (29 CFR 1910.67(d))

13. 13

    A worker notices a defect on an aerial lift before use. What should they do?

    The worker should report the defect and not use the aerial lift until it is inspected and repaired by a qualified person. (29 CFR 1910.67(e)(1))

14. 14

    Under 29 CFR 1910.67, what documentation is needed for aerial lift modifications?

    Written certification from the manufacturer or equivalent entity must be obtained and kept on file for any modifications. (29 CFR 1910.67(c))

15. 15

    What training elements are required for aerial lift operators?

    Training must include the purpose and use of controls, hazards of the workplace, and recognition of instability conditions. (29 CFR 1910.67(e)(4))

16. 16

    A operator is assigned to an unfamiliar aerial lift model. What must happen first?

    The operator must receive specific instructions on that model from a qualified person before operating it. (29 CFR 1910.67(e)(4))

17. 17

    What must be in place to prevent aerial lift tip-over?

    Outriggers, if provided, must be used according to the manufacturer's instructions to stabilize the lift. (29 CFR 1910.67(e)(5))

18. 18

    Under OSHA rules, how should aerial lifts be stored?

    Aerial lifts should be stored in a manner that protects them from weather and vandalism, following manufacturer's guidelines. (29 CFR 1910.67(e)(1))

19. 19

    What is required if an aerial lift contacts a power line?

    The equipment must be de-energized, and workers must follow emergency procedures to ensure safety. (29 CFR 1910.67(e)(7))

20. 20

    Define a boom-supported elevating work platform as per OSHA.

    It is a device that elevates personnel on a platform supported by a boom, used in aerial lifts. (29 CFR 1910.67(a))

21. 21

    What controls must aerial lifts have?

    Aerial lifts must have controls that are clearly marked and designed to prevent accidental operation. (29 CFR 1910.67(d))

22. 22

    A worker in an aerial lift basket feels unstable. What action is needed?

    The worker should immediately lower the basket and exit safely, then report the issue for inspection. (29 CFR 1910.67(e)(5))

23. 23

    Under 29 CFR 1910.67, what standards must aerial lifts meet?

    They must meet the requirements of ANSI A92.2-1969 for design, construction, and safe use. (29 CFR 1910.67(b))

24. 24

    What inspection records are needed for aerial lifts?

    Records of inspections and maintenance must be kept as required by the manufacturer's recommendations. (29 CFR 1910.67(e)(1))

25. 25

    How must workers enter and exit an aerial lift basket?

    Workers must use the means provided by the manufacturer, such as steps or platforms, and never climb on the rails. (29 CFR 1910.67(e)(6))

26. 26

    What is the role of a qualified person in aerial lift operations?

    A qualified person must inspect and certify repairs or modifications to ensure compliance with standards. (29 CFR 1910.67(c))

27. 27

    Under OSHA, what prevents overloading on aerial lifts?

    The lift must not be loaded beyond its rated capacity as specified by the manufacturer. (29 CFR 1910.67(e)(8))

28. 28

    A aerial lift is being used in windy conditions. What precautions are required?

    Operations should cease if wind conditions create a hazard, based on manufacturer's guidelines. (29 CFR 1910.67(e)(5))

29. 29

    What signage is required on aerial lifts?

    Aerial lifts must have warning signs indicating hazards and operational instructions. (29 CFR 1910.67(d))

30. 30

    Define a vehicle-mounted elevating and rotating work platform.

    It is an aerial device mounted on a vehicle, used for positioning personnel, as covered under OSHA standards. (29 CFR 1910.67(a))

31. 31

    What must be done with aerial lift tires?

    Tires must be properly inflated and maintained according to the manufacturer's specifications. (29 CFR 1910.67(e)(1))

32. 32

    Under 29 CFR 1910.67, how should electrical systems on aerial lifts be handled?

    Electrical systems must be inspected and maintained to prevent shocks or failures. (29 CFR 1910.67(e)(3))

33. 33

    A worker must perform maintenance on an aerial lift. What safety steps are needed?

    The lift must be locked out and tagged out to control hazardous energy before maintenance begins. (29 CFR 1910.147, as referenced in general OSHA practices)

34. 34

    What stability features are required on aerial lifts?

    Aerial lifts must have features like outriggers to maintain stability during operation. (29 CFR 1910.67(e)(5))

35. 35

    How are aerial lifts categorized under OSHA?

    They are categorized as vehicle-mounted elevating and rotating work platforms. (29 CFR 1910.67(a))

36. 36

    What emergency procedures must be in place for aerial lifts?

    Emergency descent procedures must be established and operators trained on them. (29 CFR 1910.67(e)(4))

37. 37

    Under 29 CFR 1910.67, what protects against unintended movement?

    Devices such as interlocks or brakes must prevent unintended movement of the lift. (29 CFR 1910.67(d))

38. 38

    A operator forgets to use fall protection in an aerial lift. What is the risk?

    The risk includes serious injury from falls, and it violates OSHA requirements for personal protective equipment. (29 CFR 1910.67(e)(2))

39. 39

    What manufacturer instructions must be followed for aerial lifts?

    All operations, inspections, and maintenance must adhere to the manufacturer's manual. (29 CFR 1910.67(e)(1))

40. 40

    Define the term 'extensible boom platform' in aerial lifts.

    It is a type of aerial lift where the boom can extend to position personnel at height. (29 CFR 1910.67(a))

41. 41

    What is required for the platform of an aerial lift?

    The platform must be equipped with guardrails and secured to prevent tipping. (29 CFR 1910.67(e)(2))

42. 42

    A aerial lift is used near traffic. What precautions are needed?

    Barriers or spotters must be used to protect against vehicle collisions. (29 CFR 1910.67(e)(9))

43. 43

    Under OSHA, how must aerial lift booms be inspected?

    Booms must be visually inspected for defects and structural integrity before use. (29 CFR 1910.67(e)(1))

44. 44

    What training verification is needed for aerial lift operators?

    Employers must ensure operators are trained and competent, with records maintained. (29 CFR 1910.67(e)(4))

45. 45

    How should aerial lifts be operated on slopes?

    They must be operated according to manufacturer's guidelines to avoid tipping. (29 CFR 1910.67(e)(5))

46. 46

    What is the purpose of outriggers on aerial lifts?

    Outriggers provide stability to prevent the lift from tipping during elevation. (29 CFR 1910.67(e)(5))

47. 47

    A worker is lowering an aerial lift basket. What safety check is required?

    Ensure the area below is clear of personnel and obstacles to prevent injury. (29 CFR 1910.67(e)(6))

48. 48

    Under 29 CFR 1910.67, what applies to articulating boom platforms?

    They must meet design standards for safe positioning and operation. (29 CFR 1910.67(b))

49. 49

    What must be done if an aerial lift fails an inspection?

    It must be removed from service until repaired and re-inspected. (29 CFR 1910.67(e)(1))

50. 50

    Define 'aerial device' as used in OSHA standards.

    It refers to any powered device intended to elevate personnel for work purposes. (29 CFR 1910.67(a))

51. 51

    What fall protection systems are acceptable for aerial lifts?

    Body belts, harnesses, or lanyards attached to the boom or basket. (29 CFR 1910.67(e)(2))

52. 52

    Under OSHA, how are aerial lifts distinguished from other equipment?

    They are specifically for elevating and positioning personnel on vehicle-mounted platforms. (29 CFR 1910.67(a))

53. 53

    What hazards are associated with aerial lift use?

    Hazards include falls, electrical contact, and tip-overs, requiring specific controls. (29 CFR 1910.67(e))

54. 54

    A operator must move an aerial lift while elevated. Is this allowed?

    It is allowed only if the lift is designed for that purpose and operated per manufacturer's instructions. (29 CFR 1910.67(e)(6))

55. 55

    What documentation supports aerial lift training?

    Training records must be maintained to verify operator competency. (29 CFR 1910.67(e)(4))

56. 56

    How must aerial lifts be secured when not in use?

    They must be parked in a stable position with controls locked to prevent unauthorized use. (29 CFR 1910.67(e)(1))

57. 57

    Under 29 CFR 1910.67, what ensures operator safety?

    Use of personal protective equipment and adherence to operational procedures. (29 CFR 1910.67(e))

58. 58

    What is required for the hydraulic systems of aerial lifts?

    Hydraulic systems must be inspected for leaks and proper function. (29 CFR 1910.67(e)(3))

59. 59

    A aerial lift operator encounters poor weather. What should they do?

    Cease operations if weather conditions pose a safety risk, per manufacturer's guidelines. (29 CFR 1910.67(e)(5))

60. 60

    What general industry standard covers aerial lifts?

    CFR 1910.67 for vehicle-mounted elevating and rotating work platforms. (29 CFR 1910.67)