Fall Protection Trigger Heights Construction vs General Industry
54 flashcards covering Fall Protection Trigger Heights Construction vs General Industry for the OSHA Fall Protection section.
Fall protection trigger heights outline the minimum elevations at which workers must use protective measures to prevent falls, as defined by OSHA regulations. In construction, OSHA's 29 CFR 1926 Subpart M requires fall protection at 6 feet or more, while general industry under 29 CFR 1910 Subpart D typically mandates it at 4 feet for many hazards, though exceptions exist based on specific risks. These differences ensure tailored safety for varying work environments.
On OSHA Outreach Training exams, this topic often appears in multiple-choice questions that compare trigger heights between construction and general industry, testing your ability to distinguish regulatory specifics. A common trap is overlooking how site conditions or industry type can alter requirements, leading to incorrect assumptions about universal standards.
Double-check your worksite's classification to apply the right height threshold and avoid citations.
Terms (54)
- 01
In construction, what is the minimum height above a lower level that requires fall protection?
Six feet or more above a lower level (29 CFR 1926.501(b)(1)).
- 02
For general industry, what height triggers fall protection for unprotected sides and edges?
Four feet or more above a lower level, as specified for certain walking-working surfaces (29 CFR 1910.28(b)).
- 03
What is the fall protection trigger height for construction work on roofs?
Six feet or more above a lower level (29 CFR 1926.501(b)(13)).
- 04
In general industry, how high must a platform be before fall protection is required under OSHA?
Four feet or more above a lower level for most platforms (29 CFR 1910.28(b)(1)).
- 05
What height in construction requires the use of guardrails or other fall protection systems?
Six feet or more above a lower level (29 CFR 1926.501(b)).
- 06
Under OSHA construction standards, what triggers the need for personal fall arrest systems?
When working at heights of six feet or more above a lower level (29 CFR 1926.501(b)(2)).
- 07
In general industry, what is the height threshold for requiring fall protection on stairways?
Four feet or more above a lower level (29 CFR 1910.28(b)(11)).
- 08
For general industry, when is fall protection needed for employees on elevated surfaces?
At four feet or more above a lower level (29 CFR 1910.28(b)).
- 09
In construction, what height above a lower level requires protection from falls for leading edges?
Six feet or more (29 CFR 1926.501(b)(4)(i)).
- 10
Under 29 CFR 1910, what height prompts fall protection requirements for fixed ladders?
Generally four feet or more, but specific to ladder design (29 CFR 1910.28(b)(9)).
- 11
What is the trigger height for fall protection when working on formwork in construction?
Six feet or more above a lower level (29 CFR 1926.501(b)(8)).
- 12
In general industry, how high must a work area be to require guardrail systems?
Four feet or more above a lower level (29 CFR 1910.28(b)(3)).
- 13
For construction workers on precast concrete work, what height requires fall protection?
Six feet or more above a lower level (29 CFR 1926.501(b)(12)).
- 14
Under OSHA general industry rules, what height above ground level needs fall protection for ramps?
Four feet or more (29 CFR 1910.28(b)(4)).
- 15
What minimum height in construction triggers fall protection for residential work?
Six feet or more above a lower level (29 CFR 1926.501(b)(13)).
- 16
In general industry, when working over dangerous equipment, what height requires fall protection?
Four feet or more above a lower level (29 CFR 1910.28(b)(5)).
- 17
Under 29 CFR 1926.501, what height for wall openings in construction requires protection?
Six feet or more above a lower level (29 CFR 1926.501(b)(14)).
- 18
What is the fall protection height requirement for excavations in construction?
Six feet or more above a lower level (29 CFR 1926.501(b)(7)).
- 19
In general industry, what height for open pits triggers fall protection?
Four feet or more above a lower level (29 CFR 1910.28(b)(6)).
- 20
Before starting work at heights in construction, what fall protection must be in place?
Fall protection systems if the height is six feet or more above a lower level (29 CFR 1926.501(b)(1)).
- 21
In general industry, what must be done when employees work at heights of four feet or more?
Provide fall protection as required (29 CFR 1910.28(b)).
- 22
When a construction worker is on a scaffold, at what height must fall protection be used?
Six feet or more above a lower level (29 CFR 1926.501(b)(9)).
- 23
In general industry, before accessing a platform over four feet, what protection is needed?
Fall protection systems must be provided (29 CFR 1910.28(b)(1)).
- 24
What is the first step for fall protection when working above six feet in construction?
Assess the work area and implement required systems (29 CFR 1926.501(b)).
- 25
In general industry, when preparing to work near edges over four feet, what must be ensured?
That fall protection is in place (29 CFR 1910.28(b)).
- 26
A construction worker is tasked with erecting steel at 7 feet high. What must be provided?
Fall protection systems, as it's over six feet (29 CFR 1926.501(b)(1)).
- 27
In general industry, a worker on a mezzanine 5 feet high faces an edge. What is required?
Fall protection, since it's over four feet (29 CFR 1910.28(b)).
- 28
If a construction employee is working near a hoist area at 8 feet, what fall protection applies?
Systems must be used for heights of six feet or more (29 CFR 1926.501(b)(10)).
- 29
In general industry, if an employee is above a dangerous pit at 3.5 feet, is fall protection needed?
No, as it's under four feet, but verify specific conditions (29 CFR 1910.28(b)).
- 30
Under 29 CFR 1926.501, what fall protection is required for employees on walking-working surfaces?
Protection for heights of six feet or more above a lower level (29 CFR 1926.501(b)(1)).
- 31
In general industry, under 29 CFR 1910, what height mandates fall protection for runways?
Four feet or more above a lower level (29 CFR 1910.28(b)(7)).
- 32
Under OSHA construction standards, when is fall protection not required below a certain height?
Below six feet above a lower level, except for specific cases (29 CFR 1926.501(b)).
- 33
What height in general industry under 29 CFR 1910 triggers protection for floor holes?
Four feet or more above a lower level (29 CFR 1910.28(b)(8)).
- 34
Under 29 CFR 1926.501, how does fall protection apply to different construction activities?
At six feet or more above a lower level for most activities (29 CFR 1926.501(b)).
- 35
In general industry, under 29 CFR 1910, what is the height for fall protection on loading docks?
Four feet or more above a lower level (29 CFR 1910.28(b)(10)).
- 36
What defines the trigger height for fall protection in construction per OSHA?
Six feet above a lower level as the minimum (29 CFR 1926.501(b)(1)).
- 37
In general industry, what height is considered the standard for fall protection triggers?
Four feet above a lower level (29 CFR 1910.28(b)).
- 38
How often must fall protection plans be reviewed in construction for heights over six feet?
As needed, but not specified in frequency; ensure compliance at all times (29 CFR 1926.501).
- 39
In general industry, what is the maximum height without fall protection for certain surfaces?
Less than four feet above a lower level, per requirements (29 CFR 1910.28(b)).
- 40
Before using fall protection in construction at heights over six feet, what must be checked?
That systems are properly installed and meet standards (29 CFR 1926.502).
- 41
In general industry, when setting up work areas over four feet, what procedural step is key?
Ensure fall protection is in place before starting (29 CFR 1910.28(b)).
- 42
A scenario where a construction team is building at 10 feet: what fall protection is mandatory?
Full systems, as it's over six feet (29 CFR 1926.501(b)(1)).
- 43
In general industry, if a worker is on a platform exactly four feet high, what action is needed?
Provide fall protection (29 CFR 1910.28(b)).
- 44
Under 29 CFR 1926.501, what height for fall protection applies to overhead bricklaying?
Six feet or more above a lower level (29 CFR 1926.501(b)(11)).
- 45
In general industry, under 29 CFR 1910, how is fall protection height determined for vats?
Four feet or more above a lower level (29 CFR 1910.28(b)(12)).
- 46
In construction, what height above water requires fall protection during overwater operations?
Six feet or more above a lower level (29 CFR 1926.501(b)(15)).
- 47
For general industry, what height for fall protection is specified for shipyard work areas?
Four feet or more, but note this may cross standards (29 CFR 1910.28(b)).
- 48
In general industry, what height triggers the need for fall protection training programs?
For work at four feet or more (29 CFR 1910.28 and related).
- 49
Under 29 CFR 1926.501, what fall protection is required for trenches over six feet deep?
Protection for edges six feet or more above lower levels (29 CFR 1926.501(b)(7)).
- 50
In general industry, how is fall protection enforced for heights between three and four feet?
Not typically required below four feet (29 CFR 1910.28(b)).
- 51
What height in construction necessitates fall protection for pile driving operations?
Six feet or more above a lower level (29 CFR 1926.501(b)(5)).
- 52
In general industry, for conveyor belt maintenance, what height requires protection?
Four feet or more above a lower level (29 CFR 1910.28(b)).
- 53
A worker in construction at 5.5 feet high without protection: what violation occurs?
Failure to provide fall protection as required at six feet (29 CFR 1926.501(b)(1)).
- 54
In general industry, if a surface is 3 feet high, is fall protection mandatory?
No, as it's below four feet (29 CFR 1910.28(b)).